Eminent Spine®

You Are Viewing

Blog

White Paper Released Detailing Eminent Spine Anterior Cervical Plate (“King Cobra”) and the Eminent Spine PEEK Cervical Cage (“Copperhead”)

May 16, 2014 Eminent Spine has released a white paper authored by Dr. Stephen P Courtney of Plano Orthopedic Sports Medicine and Spine Center. The results of a study of its Anterior Cervical Plate (“King Cobra”) and the Eminent Spine PEEK Cervical Cage (“Copperhead”). This study proves that the King Cobra® cervical plate and the Copperhead® PEEK cage […]

Eminent Spine Issued Bone Plate and Plating System Patent

May 14, 2014 On April 1st 2014, the United States Patent and Trademark Office issued a patent for Eminent Spine’s Bone Plate and Plating System  (Fang Plate).  The patent number issued was 8,685,069.   The Tri-lobe Technology is utilized in the Fang Plate.  The locking mechanism of the screw/plate interface allows for a very low profile […]

Eminent Spine Issued Patents For Pedicle Screw Fixation System and Spine Cross Connector

May 14, 2014 Georgetown, Texas – On November 5th 2013, the United Sates Patent and Trademark Office issued a Utility patent for Eminent Spine’s Pedicle Screw Fixation System (DiamondBack Pedicle Screw).   The patent number awarded was 8,574,274. On June 11th, 2013, Eminent Spine was awarded patent number 8,460,342 for the Spine Cross-Connector (Boa Constrictor). About […]

Eminent Spine Passes Second Consecutive FDA Inspection

May 14, 2014 Georgetown, Texas – Eminent Spine is pleased to announce that it has passed two consecutive inspections conducted by the Food and Drug Administration (FDA). In the last three years, the FDA has conducted two inspections at the Eminent Spine facility in Georgetown, Texas. The first was conducted from February 28th through March […]

Eminent Spine’s Cervical Traction Devices

For those suffering from cervical disc herniation and stenosis or other types of neck pain or trauma, anterior cervical interbody fusion is an accepted treatment for these conditions.  In some cases, doctors use metal plates, screws and rods to help the spine fuse after cervical fusion as bone heals best when it is held still.  […]

Eminent Spine – The Texas-Based Spine Company

To say that Eminent Spine has a lot of Texas pride is an understatement.  The Texas-based spine company, located in Georgetown, Texas, not only manufactures all of their devices from the state, but they even named some of their devices in honor of Texas. About Eminent Spine Eminent Spine was founded in 2008 by Dr. […]

Eminent Spine – Spinal Device Manufacturers

There are many spinal device manufacturers that surgeons may choose from throughout the world, but few offer devices of the same quality, innovation and low cost as ones produced by Eminent Spine.  The Georgetown, Texas company, co-founded by Dr. Steve Courtney and David Frehill, develop a range of products that have FDA 510(k) market clearance. […]

Lumbar Spinal Fusion

Lumbar spinal fusion is a surgery performed that cause the bones of the spine in the lower back grow together in an effort to minimize or eliminate pain.  Lumbar pain is the second most common reason that patients visit a family doctor, led only be the common cold.  In more than 90 percent of those […]

Minimally Invasive Surgery “MIS”

Minimally Invasive Surgery techniques offer many benefits over traditional surgery, and Eminent Spine offers several products designed specifically for MIS back surgery. Whenever possible, surgeons try to perform procedures that are easier on the patient, with less recovery time, which is why the use of minimally invasive surgery has grown tremendously over the years. Benefits […]

EMINENT SPINE | 7200 N. IH 35 Bldg. #1, Georgetown, TX 78626 | info@eminentspine.com